|
| Records 1 to 42, of 42 |
|---|
| Name | Quantity | Material | Dimensions | Comments | Photo ID | DWG | ID |
|---|
| base plate | 1 | bronze | 21.5 x 8.25 | | | 101 | 101 |
| sides | 2 | bronze | 21.5 x 1.937 | | | 102 | 102 |
| screw | 10 | black steel | | hold plate to sides | | | 103 |
| end plate | 1 | wood | | rear end of base | | 104 | 104 |
| end plate cover | 1 | wood | | holds connector plug | | 104 | 105 |
| screw | 2 | brass | | hold end plates to sides | | | 106 |
| inner conductors | 12 | brass | | | | 104 | 107 |
| outer conductors | 12 | brass | | | | 104 | 108 |
| retaining bar | 1 | wood | | supports conductors | | 104 | 109 |
| wood screw | 11 | brass | | hold retaining bar to end plate | | | 110 |
| terminals | 14 | brass | | 2 power, 12 signal | | 104 | 111 |
| bob retainer | 2 | bronze | | | | 112 | 112 |
| screw | 2 | black steel | | hold retainer to base | | | 113 |
| start/stop lever | 1 | black steel | | at LHS of base | | 116 | 116 |
| start/stop shaft | 1 | steel | | fits through sides | | 117 | 117 |
| split pin | 1 | steel | | holds start/stop lever to shaft | | 118 | 118 |
| retainer | 1 | black steel | | support start/stop lever | | 119 | 119 |
| extra lever | 1 | black steel | | redundant | | 120 | 120 |
| screw | 1 | black steel | | hold extra lever to shaft | | | 121 |
| bob lever | 2 | steel | | for bobs and singles | | 122 | 122 |
| clamp | 2 | steel | | | | 123 | 123 |
| screw | 2 | black steel | | hold clamp to lever | | | 124 |
| limit block | 2 | black steel | | fixed to underside of base | | 125 | 125 |
| screw | 2 | black steel | | hold limit block to base | | | 126 |
| clutch pin | 2 | steel | | project through base | | 127 | 127 |
| pin | 2 | steel | 0.060dx0.24 | hold clutch pin to lever | | | 128 |
| catch | 2 | steel | | prevent clutch pin rising | | 129 | 129 |
| pin | 2 | steel | 0.060dx0.24 | hold catch to lever | | | 130 |
| spring | 2 | spring steel | | press clutch pin forward | | 131 | 131 |
| screw | 2 | black steel | | hold spring to clutch lever | | | 132 |
| pin | 2 | steel | 0.060dx0.24 | support spring (#131) | | | 133 |
| bob lever | 2 | steel | | handed | | 134 | 134 |
| bob catch | 2 | steel | | fixed to #134 | | 135 | 135 |
| single catch | 2 | steel | | fixed to #135 | | 136 | 136 |
| screw | 2 | steel | | holding #136 and #135 to #134 | | | 137 |
| bob spring | 2 | spring steel | | returns the bob lever to normal | | 138 | 138 |
| bob spring anchor | 2 | steel | | anchor post for spring (#135) | | 139 | 139 |
| strut | 1 | bronze | | under base at distributor shaft | | 140 | 140 |
| pulley stand | 1 | bronze | | for recorder | | 141 | 141 |
| pulley | 1 | bronze | | mounted on #141 | | 142 | 142 |
| pulley spindle | 1 | steel | | fixed into #141 | | 143 | 143 |
| screw | 1 | steel | | holds #141 to base | | | 144 |
